 |
 |
 |
 |
 |
 |
 |
 |
CNC Milling Centers
| Mfg. | Type | Size | Tools | Notes |
| 1-Mazak | Variaxis 630 Full 5-Axis | 630mm pallet | 120 – HSK63A | Full 5-axis Machining |
| 2-Makino | A-81a Horizontal | 630mm pallet | 300 each HSK-a100 | Full 4-axis with 14 station Computerized Pallet Changer |
| 1-Makino | A-88e Horizontal | 630mm pallet | 90 – HSK100 | Full 4-axis Machining |
| 1-Makino | A-55e Horizontal | 400mm pallet | 90 – HSK63A | Full 4-axis Machining |
| 1-Makino | V77 Vertical | 47x27x25" | 40 - HSK 100 | Full 4-axis Machining |
| 1-OKK | HM-50S Horizontal | 500mm pallet | 40 – CAT40 | Full 4-axis Machining |
| 1-Mori Seiki | MV-80 Vertical | 60x30” travel | 40 – CAT50 | W/16” Nikken Rotary |
| 4-Mazak | Variaxis 730 Full 5-Axis | 730mm pallet | 80 - HSK 100 | Full 5-Axis 2 Pallet System |
CNC Turning Centers
| Mfg. | Type | Size | Stations | Notes |
| 1 - Mazak | QT-28N Lathe | 9.5"dia. x 28" | 12 | With Tailstock |
| 1 - Mazak | Multiplex 4300 | 12" (16.9 dia.) | 12 x 2 | Dual Spindle |
EDMs
| Mfg. | Type | Size | Notes |
| 1 - Charmilles | Robofil-2000 Wire EDM | 12x8x4” | Table size: 35x20x6” |
| 1 - Mitsubishi | FX20 Wire EDM | 20x14x10” | Table size: 25x31” |
Grinders & Hone
| Mfg. | Type | Size | Notes |
| 1 - Mitsui | MSG-205 MH Surface | 18x6x12” | Magnet: 2.5x12” |
| 1 - Okamoto | ACC-12-24DX Surface | 29.5x13.4x12.7” | Magnet: 12x24” - Wet Grinder |
| 1 - Lap Master | International Automated Lap Table | 24" |
Manual Machines & Shop Equipment
| Type | Type |
| 1 – Devlieg 3B-48 Boring Mill w/Allen-Bradly CNC Controls | Sand Blast Booth |
| 2– Pratt & Whitney 2E Jig Bores w/glass scales | Glass Blast Booth |
| 1 – Leblond Engine Lathe w/26” swing | Vibratory Finisher 36 x 18" drum |
| 1 – 50 Ton Press with full signature pressure recording | 40x40” Cast Iron Lapping Table |
| 1 – Parlac Parsetter 220 Tool Setter |
Inspection Machines
| Mfg. | Type | Size | Notes |
| 1 - Zeiss | Contura 7010 CMM | 28x38x23” | Continuous Scanning Head with Probe Changer |
| 1 - Zeiss | Eclipse 4040 CMM | 40x40x24” | Programmable with Probe Changer |
| 1 - Mitutoyo | PH350 Comparator | 10-50X | |
| 1 - Zeiss | Contura G2 | 700x1000x1000mm | Continuous Scanning Articulating Head with Probe Changer |
CNC Support
| MasterCam | CG Tech Vericut & Optimization | Wide Format Copiers |
| Teksoft Procam | Power Mill/Shape | Wide Format Plotter |
CAD Translator
| Preferred Formats: | Parasolid (.x_t) | IGES (.iges) | MasterCam |
| Other Translators Available |
May experience some issues translating from these formats |
||
| Unigraphics (.prt) STEP (.stp) |
Autocad (.dxf & .dwg) VDAFS (.vda) |
ACIS (.sat) Catia V (.CATprt) |
Catia (.exp & model) ProEngineer (.prt & .asm) |